ELIAR Multifunctional Curling Iron

Product Information:

• Diameter of the Heat Conductor: 16MM-20MM
• Heat Conductor Material: Tourmaline Ceramic
• Applicable Hair Type: Wet and Dry
• Best Modeling Time: 3-5 minutes

Instructions:

1. Turn on the machine in the heating state; it will automatically turn off after 30 minutes.
2. Heating Time: Takes 3 minutes to reach the maximum temperature of 220°C.
3. Press the On/Off button for 2 seconds to turn off the device. All LED lights will go off.
4. Press the On/Off button for 1 second to start. Red and blue lights will turn on. By default, the low-level blue light (150°C/302°F) will flash after 3 seconds, indicating the machine is heating up. Once the temperature reaches 150°C/302°F, the flashing stops, and both lights remain on. Press the On/Off button again to set a higher temperature at 180°C/356°F; the three lights will flash until reaching the desired temperature. Press the On/Off button once more to set 220°C/428°F, and all four lights will be on when it reaches that temperature.